Getting Started; Cancel Demonstration; Set Clock/Basic Settings - JVC KD-A845BT Instruction Manual

GETTING STARTED

1
Cancel the demonstration
1
Press and hold MENU.
2
Press the volume knob to select [DEMO].
3
Turn the volume knob to select [DEMO OFF], then press the knob.
4
Press MENU to exit.
2
Set the clock
1
Press and hold MENU.
2
Turn the volume knob to select [CLOCK], then press the knob.
3
Turn the volume knob to select [CLOCK SET], then press the knob.
4
Turn the volume knob to select the day, then press the knob.
5
Turn the volume knob to adjust the hour, then press the knob.
6
Turn the volume knob to adjust the minute, then press the knob.
7
Press MENU to exit.
3
Set the basic settings
1
Press and hold MENU.
2
Turn the volume knob to make a selection (see the following table),
then press the knob.
3
Press MENU to exit.
To return to the previous hierarchy, press G.
CLOCK
CLOCK ADJ AUTO: The clock time is automatically set using the Clock Time (CT) data in FM Radio
Broadcast Data System signal. ; OFF: Cancels.
CLOCK DISP ON: The clock time is shown on the display even when the unit is turned off. ; OFF: Cancels.
DIMMER
DIMMER SET Selects the display and button illumination adjusted in the [BRIGHTNESS] setting.
AUTO: Changes between the day and night adjustments when you turn off or on the car
1
headlights. * ; ON: Selects the night adjustments. ; OFF: Selects the day adjustments.
BRIGHTNESS Sets the display and button brightness for day and night separately.
1 DAY/ NIGHT: Select day or night.
2 Select the zone for setting.
KD-A845BT / KD-R840BT: BTN ZONE 1/ 2/ 3 / DISP ZONE / VOL ZONE (➜ 7)
KD-R740BT: BUTTON ZONE / DISP ZONE
3 Set the brightness level (00 to 31). (Default: DAY: 31 ; NIGHT: 15)
DISPLAY
2
SCROLL * ONCE: Scrolls the display information once. ; AUTO: Repeats scrolling at 5-second
intervals. ; OFF: Cancels.
TAG DISPLAY ON: Shows the TAG information while playing MP3/WMA/WAV files. ; OFF: Cancels.
3
USB * (KD-A845BT / KD-R840BT only)
DRIVECHANGE Selects to change the drive when a multiple drives device is connected to the USB input
terminal (front/rear).
IPOD SWITCH * 4
HEAD MODE: Controls music playback only from this unit. ; IPOD MODE: Controls music playback from both
the unit and iPod/iPhone. ; EXT MODE: Controls music playback only from the iPod/iPhone.
4
AUDIOBOOKS * (KD-A845BT / KD-R840BT only)
NORMAL / FASTER / SLOWER: Selects the playback speed of the Audiobooks sound file in your iPod/iPhone.
(Default: Depends on your iPod/iPhone setting.)
SRC SELECT
AM * 5
ON: Enables AM in source selection. ; OFF: Disables.
PANDORA * 5
ON: Enables PANDORA in source selection. ; OFF: Disables.
5
AUX * ON: Enables AUX in source selection. ; OFF: Disables.
* 1
The illumination control wire connection is required. (➜ 21)
* 2
Some characters or symbols will not be shown correctly (or will be blanked).
*
3 Displayed only when the source is USB FRONT or USB REAR.
* 4 Displayed only when the source is USB-IPOD.
* 5
Not displayed when the corresponding source is selected.
4
Default: XX