Bluetooth Audio Player; Bluetooth Settings - JVC KD-A845BT Instruction Manual

BLUETOOTH®

Bluetooth audio player

Operations and display indications may differ according to their d d l d
availability on the connected device.
To Do this
Playback 1
Press L SOURCE to select BT AUDIO.
2
Operate the Bluetooth audio player to
start playback.
Pause or resume
Press MENU (or
playback
Press 1 ∞ / 2 5 (or 5 / ∞ on RM-RK52).
Select group or folder
Press E / F (or 2 / 3 on RM-RK52).
Reverse/forward skip
Press and hold E / F (or 2 / 3 on
Reverse/fast-forward
RM-RK52).
Press 6 B repeatedly to make a
Repeat play
selection.
TRACK RPT, ALL RPT, RPT OFF
Random play Press 5 A repeatedly to make a
selection.
GROUP RND, ALL RND, RND OFF
Listen to Pandora through Bluetooth
You can listen to Pandora on your smart phone (Android OS or RIM OS)
through Bluetooth on this unit.
1
Open the Pandora application on your device.
2
Connect to Bluetooth audio player. (➜ 10, 14 right column)
3
Press L SOURCE to select PANDORA.
The source switches and broadcast starts automatically.
• You can operate Pandora in the same way as Pandora for iPod/iPhone.
(➜ 8)
d ff d h
on RM-RK52).

Bluetooth settings

1
Press and hold MENU.
2
Turn the volume knob to select [BLUETOOTH], then press the knob.
3
Turn the volume knob to make a selection (see the following table), then press the knob.
Repeat step 3 until the desired item is selected.
4
Press MENU to exit.
PHONE * 1
CONNECT / DISCONNECT: Connects or disconnects the Bluetooth phone or Bluetooth audio
player.
AUDIO
CONNECT / DISCONNECT: Connects or disconnects the JVC Smart Music Control *
APPLICATION
phone.
DELETE PAIR Selects the registered (paired) device to delete.
P.BOOK WAIT Copies up to 400 numbers from the phonebook memory of a connected phone to the unit via OPP.
SET PINCODE Changes the PIN code (up to 6 digits). (Default PIN code: 0000)
1 Turn the volume knob to select a number.
2 Press E / F to move the entry position.
Repeat steps 1 and 2 until you finish entering the PIN code.
3 Press the volume knob to confirm.
AUTO CNNCT ON: Connects automatically with the Bluetooth device when the unit is turned on. ; OFF: Cancels.
INITIALIZE YES: Initializes all the Bluetooth settings (including stored pairing, phonebook, and etc.). ;
NO: Cancels.
PH CNNT DEV / AU CNNT DEV / APP CNT DEV *
INFORMATION
device name. ; MY BT NAME: Displays the unit name (JVC UNIT). ; MY ADDRESS: Shows address
of this unit. ; BT VERSION: Shows the Bluetooth version of this unit.
*
1 [CONNECT] will not be displayed if two Bluetooth phones are connected at the same time.
* 2 JVC Smart Music Control is designed to view JVC car receiver status and perform simple
control operations on Android smart phones.
For JVC Smart Music Control operations, visit JVC website:
<http://www3.jvckenwood.com/english/car/index.html> (English website only).
* 3
Displayed only when a Bluetooth phone/audio player/application is connected.
14
Default: XX
2
in the smart
3
: Displays connected phone/audio/application