JVC KD-R826BT Instructions Manual page 24

Cd receiver
Hide thumbs Also See for KD-R826BT:
Table of Contents

Advertisement

Menu item
Subwoofer
LPF *
6
Subwoofer
Level *
6
Subwoofer
Phase *
6
HPF
Beep
Amplifier
Gain *
7
SSM
IF Band
Stereo/Mono Displayed only when the source is "FM." For settings, see page 7.
USB *
8
iPod Switch *
9
Audiobooks *
9
Bluetooth
*
6
Displayed only when <On> is selected for <Subwoofer On/Off>.
*
7
The volume level automatically changes to "Vol 30" if you change to <Low Power> with the volume level set
higher than "Vol 30."
*
8
Displayed only when "USB FRONT/ USB REAR" is selected as the source.
*
9
Displayed only when "iPod FRONT/ iPod REAR" is selected as the source.
24
ENGLISH
Selectable setting, [ Initial: Underlined ]
LOW 55Hz / MID 85Hz / HIGH 120Hz : Frequencies lower than 55 Hz/ 85 Hz/
120 Hz are sent to the subwoofer. / Off : Deactivates (all signals are sent to the rear
speakers).
Level 00 — Level 08 [ Level 04 ] : Adjusts the subwoofer output level.
0 Deg (normal) / 180 Deg (reverse) : Selects the subwoofer phase.
LOW 62Hz / MID 95Hz / HIGH 135Hz : Activates the High Pass Filter.
Frequencies lower than 62 Hz/ 95 Hz/ 135 Hz are cut off from the front/rear speakers. /
Off : Deactivates (all signals are sent to the front/rear speakers).
On / Off : Activates or deactivates the keypress tone.
Low Power : Vol 0 – Vol 30 (Selects if the maximum power of each speaker is less
than 50 W to prevent damaging the speakers.) / High Power : Vol 0 – Vol 50 /
Off : Deactivates the built-in amplifier.
Displayed only when the source is "FM." For settings, see page 7.
Auto : Increases the tuner selectivity to reduce interference noises between adjacent
stations. (Stereo effect may be lost.) / Wide : Subject to interference noises from adjacent
stations, but sound quality will not be degraded and the stereo effect will remain.
Drive Change : Selects to change the drive when a multiple drives device is connected
to the USB input terminal (front/rear).
Headunit Mode : Controls iPod playback through the unit. / iPod Mode : Controls
iPod playback through the iPod/iPhone. / Application Mode : The sound of any
functions (musics, games, applications, etc.) running on the connected iPod/iPhone is
emitted through the speakers connected to this unit.
Normal / Faster / Slower : You can select the playback speed of the Audiobooks
sound file in your iPod/iPhone. (Initial selected item depends on your iPod/iPhone
setting.)
If the USB Bluetooth Adapter, KS-UBT1, is not connected to the unit, "Please Connect BT
Adapter" will be shown on the display. For settings, see page 17.

Advertisement

Table of Contents
loading

Table of Contents