Listening To An Ipod/Iphone - JVC KD-R826BT Instructions Manual

Listening to an iPod/iPhone

You can connect an Apple iPod/iPhone using the USB 2.0 cable (accessory of the iPod/iPhone) to
the USB input terminal on the control panel or USB cable from the rear of the unit.
~
] Turns on the power.
Playback starts automatically.
Cautions:
• Avoid using the iPod/iPhone if it might hinder
your safety driving.
• Make sure all important data has been backed
up to avoid losing the data.
Selecting the control terminal
[Hold]
] <Headunit Mode/ iPod Mode/
Application Mode>
• For details, refer to <iPod Switch> setting on
page 24.
Basic operations
Applicable under <Headunit Mode/
iPod Mode>.
For <Application Mode>, applicable only for
some audio applications.
Using the remote controller
2 / 3 : [Press] Selects track/chapter.
[Hold] Fast-forwards or reverses the
track.
18 ENGLISH
Ÿ
USB cable from the
rear of the unit
USB 2.0 cable (accessory of the iPod/iPhone)
[Press] Selects track/
chapter.
[Hold] Fast-forwards or
reverses the track.
USB input terminal
and/or
Selecting a track from the menu
Not applicable under <iPod Mode/
Application Mode>.
1
2
] Select the desired menu.
Playlists j Artists j Albums j
Songs j Podcasts j Genres j
Composers j Audiobooks j (back to
the beginning)
3
] Select the desired track.
Repeat this step until the desired track
is selected.
• If the selected menu contains many tracks,
you can fast search (±10, ±100, ±1 000)
through the menu by turning the control dial
quickly.
• To return to the previous menu, press BACK.
Apple iPod/iPhone