Specifications - JVC KD-R506 Instructions Manual

Specifications

AUDIO AMPLIFIER SECTION
Maximum Power Output:
Continuous Power Output (RMS):
Load Impedance:
Tone Control Range:
Frequency Response:
Signal-to-Noise Ratio:
Line-Out Level/Impedance:
Output Impedance:
Subwoofer-Out Level/Impedance:
Other Terminal:
TUNER SECTION
Frequency Range: FM:
AM:
FM Tuner Usable Sensitivity:
50 dB Quieting Sensitivity:
Alternate Channel Selectivity (400 kHz):
Frequency Response:
Stereo Separation:
AM Tuner Sensitivity:
Selectivity:
22
Front/Rear: 50 W per channel
Front/Rear: 19 W per channel into 4 Ω, 40 Hz to 20 000 Hz
at no more than 0.8% total harmonic
distortion.
4 Ω (4 Ω to 8 Ω allowance)
Bass: ±12 dB (60 Hz, 80 Hz, 100 Hz, 200 Hz)
Q1.0, Q1.25, Q1.5, Q2.0
Middle: ±12 dB (0.5 kHz, 1.0 kHz, 1.5 kHz, 2.5 kHz)
Q0.75, Q1.0, Q1.25
Treble: ±12 dB (10.0 kHz, 12.5 kHz, 15.0 kHz,
17.5 kHz)
Q = Fixed
40 Hz to 20 000 Hz
70 dB
2.5 V/20 kΩ load (full scale)
1 kΩ
2.5 V/20 kΩ load (full scale)
USB input jack, AUX (auxiliary) input jack
87.5 MHz to 108.0 MHz
531 kHz to 1 602 kHz
11.3 dBf (1.0 μV/75 Ω)
16.3 dBf (1.8 μV/75 Ω)
65 dB
40 Hz to 15 000 Hz
30 dB
20 μV
35 dB