Table of Contents
Advertisement
Baby mode
h
This mode adjusts the exposure and tone
to bring out the healthy colour of your
baby's skin. The flash will be weaker than
normal if you choose to use it.
1 month 10days
10:00 20.DEC.2005
• You can also enter your baby's age so that
it appears when you are showing the
picture later.
• You can also use the [LUMIX Simple
Viewer] or [PHOTOfunSTUDIO] software
on the included CD-ROM to print your
baby's age. (For details, refer to the
separate operating instructions for PC
connection.)
BABY
WITH AGE
WITHOUT AGE
BIRTHDAY SET.
SELECT
SET
n Age display setting
• To show age, first enter the birthday,
select [WITH AGE], and press q.
• To not show age, select [WITHOUT AGE],
and press q.
64
VQT0S36
Recording pictures (advanced)
19
MENU
MENU
n Birthday setting
Select [BIRTHDAY SET.] and press q.
1
[PLEASE SET THE BIRTHDAY OF
2
THE BABY] appears on the display.
Select year/month/day with w/q, then
change the date with e/r.
Press [MENU] to exit.
3
• If you select [WITH AGE] but you haven't
set the birthday, a message appears.
Press [MENU] and follow steps
to enter the birthday.
• The ISO sensitivity is automatically
adjusted to the optimal value.
• Whenever you turn the camera on in Baby
mode or switch to Baby mode from any
other scene mode, your baby's age and
the current date and time appear on the
display for about 5 seconds.
• Actual age displays depend on the
[LANGUAGE] setting.
• The display on the actual day of your
baby's birth will be 0 months 0 days.
• Check the clock and birthday settings if
the age shown is incorrect.
• Note that if you have selected [WITHOUT
AGE], age information will not be
recorded for any pictures you take. The
information will not appear even if you
select [WITH AGE] after taking pictures.
• For resetting the birthday setting, use
[RESET] in the [SETUP] menu. (P24)
and
2
3
Advertisement
Table of Contents
