Advertisement
®
FRAMING NAILER
34 DEGREE & 28 DEGREE MAGAZINE ANGLES
Models 91053, 91054, 92147, & 92185
ASSEMBLY AND OPERATING INSTRUCTIONS
®
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web site at: http://www.harborfreight.com
TO PREVENT SERIOUS INJURY,
READ AND UNDERSTAND ALL WARNINGS
AND INSTRUCTIONS BEFORE USE.
©
®
Copyright
2004 by Harbor Freight Tools
. All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools.
For technical questions or replacement parts, please call 1-800-444-3353.
Advertisement
Table of Contents
Related Manuals for Central Pneumatic 91053
Summary of Contents for Central Pneumatic 91053
- Page 1 . All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. For technical questions or replacement parts, please call 1-800-444-3353.
-
Page 2: Specifications
Operating PSI All Models: 75 PSI to 125 PSI * SCFM Models 91053 & 91054: 8 to 10 SCFM @ 90 PSI Required Model 92147: 12 to 14 SCFM @ 100 PSI Model 92185: 13 to 15 SCFM @ 100 PSI... - Page 3 Check for damaged parts. Before using any tool, any part that appears dam- aged should be carefully checked to determine that it will operate properly and 91053, 91054 For technical questions, please call 1-800-444-3353. Skus 92147, &...
- Page 4 Use of any other parts will void the warranty. Only use accessories intended for use with this tool. Approved accessories are available from Harbor Freight Tools. Do not operate tool if under the influence of alcohol or drugs. Read warning labels if taking prescription medicine to determine if your judgement or reflexes are impaired while taking drugs.
- Page 5 When unpacking, check to make sure all parts shown in the Parts List on page 12 are included. If any parts are missing or broken, please call Harbor Freight Tools at the number on the cover of this manual as soon as possible.
-
Page 6: Operation
For best service, you should incorporate an oiler, regulator, and inline filter, as shown in the diagram below. Hoses, couplers, oilers, regulators, and filters are all avail- able at Harbor Freight Tools. ROOFING NAILER To connect this tool, we recommend you use the included quick connector. - Page 7 The tool must not cycle (fire). If it fails to perform in the manner explained in bold, have it repaired by a qualified service technician. QUICK CONNECTOR (87) LOWER SAFETY (32) 91053, 91054 For technical questions, please call 1-800-444-3353. Skus 92147, & 92185 TRIGGER (48)
-
Page 8: Loading Nails
While holding the Tab back, carefully press the Latch. BE CAREFUL. When you press the Latch (78), the Tab (64) will spring forward with force. Slowly and cautiously allow the tab to slide forward. 91053, 91054 For technical questions, please call 1-800-444-3353. Skus 92147, &... -
Page 9: Operating The Nailer
Make sure to store the Nailer in its Carrying Case in a clean, dry, safe location out of reach of children. EXHAUST COVER (3) QUICK CONNECTOR (87) 91053, 91054 For technical questions, please call 1-800-444-3353. Skus 92147, & 92185 Operating the Nailer... -
Page 10: Clearing Jams
Nailer, and reload the Nails. Then, reconnect the air supply and continue working. When finished working, Disconnect the air supply. Remove the Nails. Then, store the Nailer and nails in a location out of children’s reach. 91053, 91054 For technical questions, please call 1-800-444-3353. Skus 92147, & 92185... -
Page 11: Inspection, Maintenance, And Cleaning
PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. Some parts are listed and shown for illustration purposes only, and are not avail- able individually as replacement parts. 91053, 91054 For technical questions, please call 1-800-444-3353. Skus 92147, & 92185... -
Page 12: Parts List
91053, 91054 For technical questions, please call 1-800-444-3353. Skus 92147, & 92185 Parts List l l o Assembly Diagram l i a l i a l l o Page 12...