Table of Contents
Advertisement
∫ AM frequency step
Main unit only
The step is factory-set to 9 kHz, but you can change it to receive
broadcasts allocated in 10-kHz steps.
1 Press [INPUT SELECTOR] to select "FM".
2 Press and hold [INPUT SELECTOR].
After a few seconds, the display changes to show the current
minimum frequency. Continue to hold the button down. The
minimum frequency changes and the step is changed.
To return to the original step, repeat the above steps.
[Note]
After changing the setting, previously preset frequencies will be
cleared.
Optional antenna connections
Use outdoor antennas if radio reception is poor.
≥Disconnect the antenna when the unit is not in use.
≥Do not use the outdoor antenna during an electrical storm.
FM outdoor antenna
(Using a television antenna)
≥Disconnect the FM indoor antenna.
≥The antenna should be installed by a competent
technician.
75 ≠ coaxial cable
(not included)
Leave the AM loop antenna connected.
FM ANT
(75 )
AM
ANT
EXT
TV
TV TV
TV
LOOP
AUDIO
AUDI
AUDIO
UDIO
IN
IN IN
IN
AM outdoor antenna
(Using a vinyl wire)
Run a piece of vinyl wire horizontally across a
window or other convenient location.
5–12 m
RQT8291
21
Hide quick links:
Advertisement
Table of Contents
