Table of Contents
Advertisement
Simple setup (continued)
Other speaker setup options
Other speaker setup options
■ Attaching to a wall
You can attach the front, surround and center speakers to the wall.
• The wall or pillar on which the speakers are to be attached should be capable of supporting 10 kg per screw. Consult a
qualifi ed building contractor when attaching the speakers to a wall. Improper attachment may result in damage to the wall
and speakers.
1
Drive a screw (not included) into a wall.
2
Fit the speaker securely onto the screw(s) with the hole(s).
Front and surround speakers
Optional antenna connections
Optional antenna connections
Use outdoor antennas if radio reception is poor.
Note
• Disconnect the outdoor antenna when the unit is not in use.
• Do not use the outdoor antenna during a lightning storm.
FM outdoor antenna
(Using a television antenna)
Rear panel of
this main unit
• Disconnect the FM indoor antenna.
• The outdoor antenna should be installed by a competent
technician.
10
RQT8043
Center speaker
AM outdoor antenna
(Using a vinyl wire)
FM outdoor antenna
(not included)
75
coaxial cable
(not included)
• Run a piece of vinyl wire horizontally across a window or
any other convenient location.
• Leave the AM loop antenna connected.
Ø4.0 mm
Wall or pillar
AM outdoor antenna
(not included)
5 to 12 m
AM loop antenna
(included)
Ø7.5 to 9.5 mm
5.0 to 7.0 mm
Rear panel of
this main unit
Hide quick links:
Advertisement
Table of Contents
