Using With Analog Video Unit And Your Computer - Signal Convert Function - Sony Handycam DCR-TRV530 Operating Instructions Manual

Using with analog video unit and your
computer – Signal convert function
You can capture images and sound from an analog video unit connected to your
computer which has the i. LINK (DV) jack to your camcorder.
Before operation
Set DISPLAY to LCD in the menu settings. (The default setting is LCD.)
(1) Set the POWER switch to VCR.
(2) Set A/V t DV OUT in
(3) Start playback on the analog video unit.
(4) Start capturing procedures on your computer.
The operation procedures depend on your computer and the software which
you use.
For details on how to capture images, refer to the instruction manual of your
computer and software.
AUDIO/VIDEO
OUT
S VIDEO
VIDEO
AUDIO
After capturing images and sound
Stop capturing procedares on your computer, and stop the playback on the analog
video unit.
Notes
•You need to install software which can exchange video signals.
•Depending on the condition of the analog video signals, the computer may not be able
to output the images correctly when you convert analog video signals into digital
video signals via your camcorder. Depending on the analog video unit, the image may
contain noise or incorrect colors.
•You cannot record or capture the video output via your camcorder when the video
includes copyright protection signals such as ID-2 system.
74
to ON in the menu settings. (P. 79)
VIDEO
AUDIO
: Signal flow
DV IN/OUT
(optional)
i.LINK