Wolf CT15E Use & Care Information Manual page 14

W O L F
C O O K TO P
G L A S S C E R A M I C T O P
Clean the top surface thoroughly before
operating the cooktop for the first time. Apply
approximately one teaspoon of nonabrasive
cleaner such as Elco Cook Top Cleaning
Creme, to the surface of the glass ceramic with
a lightly dampened clean cloth. Use a second
clean cloth to remove any remaining cleaner
residue. Wipe the cooktop surface with a dry
cloth to completely eliminate any remaining
moisture.
The cooktop should be cleaned after each use.
Be careful not to wipe or clean any hot areas
to avoid personal injury. It will be safe to clean
each element area whenever the correspond-
ing hot surface indicator light has gone out.
To remove heavy or burned-on spills, allow the
cooktop to cool. Use the razor blade scraper
provided with the cooktop to gently scrape off
any burned-on substances. Remove any
remaining residue using the cleaning method
described above.
Pitting of the glass ceramic is possible if
spills with a high sugar content are left in
the hot zone. Use the razor provided to
move the spill to a cool area for cleaning
after the cooktop cools.
14
E L E C T R I C C O O K TO P
C L E A N I N G
U S E & C A R E
C O O K T O P F R A M E ( F R A M E D M O D E L S )
For general cleaning after each use, apply a
nonabrasive cleaner to the stainless steel
cooktop frame and gently wipe with a clean
towel or cloth. Be sure to remove any cleaner
residue from the frame and glass ceramic
surface before using the cooktop.