Wolf CT15E Use & Care Information Manual page 11

W O L F E L E C T R I C C O O K TO P
H OT S U R FAC E I N D I C AT O R S
As an additional safety precaution, hot surface
indicator lights will illuminate when the
surface temperature of the glass is above
150˚F (65˚C). Each heating element has an
independently controlled light located to the
right of that element as shown in the
illustration below. Even if the cooktop controls
are turned off, you are alerted to any area of
the cooktop that remains hot.
Do not set griddles or oversized pans on
the hot surface indicator lights. This may
make them burn out prematurely.
Location of
indicator
Hot surface indicators
Dimensions in parentheses are in
millimeters unless otherwise specified.
U S E & C A R E
I N I T I A L S TA RT- U P
Before operating the cooktop, please read the
entire Use & Care Information.
Clean the cooktop surface as outlined in the
Glass Ceramic Top Cleaning section on page
14. The cooktop surface must be free of any
foreign substance, especially those that could
melt and permanently adhere to the glass.
During the first uses of your new electric
cooktop, you may smell a slight burning odor
or see light smoke. Both of these conditions
are normal in new glass ceramic cooktops.
Make sure that the cooktop surface is
clean and dry before operating.
Do not place hot cooking utensils directly
over the control panel.
11