Panasonic LUMIX DMC-FX9GC Operating Instructions Manual page 94

∫ Folder Composition
The folder structure of the card or
MultiMediaCard is displayed as the
illustration below.
≥SD Memory Card
≥MultiMediaCard
1 Folder number
2 File number
3 JPG: pictures
MOV: motion pictures
Files will be saved in each folder as follows.
DCIM Folders from [100_PANA] to
[999_PANA]
100_PANA Pictures/motion pictures
MISC Files on which the DPOF
print settings are recorded
• Picture data of up to 999 pictures
recorded by the camera can be included
in 1 folder. If the number of picture data
exceeds 999, another folder will be
created.
• When you reset the file number or the
folder number, select [NO.RESET] in the
[SETUP] menu. (P22)
94
VQT0S68
Connecting to a PC or Printer
DCIM
100_PANA
1
100_PANA
P1000001.JPG
2 3
P1000002.JPG
P1000999.JPG
101_PANA
999_PANA
MISC
• If the remaining battery power is
exhausted during communication, the
recorded data may be damaged. When
you connect the camera to the PC, use a
battery with sufficient battery power (P13)
or the AC adaptor (DMW-AC5; optional).
• If the remaining battery power becomes
low during communication, the battery
indication turns red and blinks (P13) and
the alarm beeps. In this case, stop the
communication at once.
• While [ACCESS] is being displayed, do
not disconnect the USB connection cable.
• When the OS of your PC is Windows
2000 and you connect the camera to
the PC with the USB connection cable,
do not replace the card with the
camera connected to the PC. The
information in the card may be
damaged. Make sure to disconnect the
USB connection cable beforehand
when you replace the card. For details,
refer to the separate operating
instructions for PC connection.
• Do not use any other USB connection
cables except the supplied one.
• Also refer to the operating instructions of
the PC.
∫ PictBridge (PTP) setting
Even if you set the [USB MODE] to
[PictBridge (PTP)], you can connect to the
PC only when the OS is Windows XP
Home Edition, Windows XP Professional or
Mac OS X.
• You can only load pictures from the
camera and cannot write them on the card
or delete them.
• When there are 1000 or more pictures on
a card, the pictures may not be imported.