Aux 9-10 Output Section - SoundCraft MH2 User Manual

9
11
10
8
7
36

Aux 9-10 Output Section

5
TB/OSC
6
A9-10
Aux 9-10 Outputs have their own dedicated output section and are always controlled by linear
faders.
Each fader (1) feeds the Aux signal to balanced rear-panel XLR outputs. There is a pre-fade
insert point with separate jacks, and TB (osc)(2), Mute (3) and AFL (4) buttons are provided.
The 12-segment LED bargraph meters (5) at the top of the section normally meter the Monitor
LR Outputs, but can be switched to meter the Aux 9-10 Outputs by pressing the AUX 9-10
button (6) below the meters.
The Aux 9-10 Outputs are intended for use as a stereo in-ear monitor send, and for this
reason a 4-band equaliser section is provided, allowing a degree of sweetening of the in-ear
mix. The EQ section is stereo, and when it is switched in by the EQ switch (7) affects both Aux
9 and Aux 10 output signals. Four fixed-frequency bands are provided with shelving LF (8)
and HF (9) sections and two peak/dip mid sections (10)(11).
2
3
4
1
LR Mntr or
Aux 9-10
meter
INS
4-band
SUM
EQ
From LR Mntr
section
AUX
9-10
A9-10
MUTE
Fdr
AFL
A9-10 O/P