Panasonic LUMIX DMC-FX550 Operating Instructions Manual page 29

q [ECONOMY]
•
Press the shutter button halfway or turn the camera off and on to cancel [POWER SAVE].
•
[POWER SAVE] is set to [5MIN.] in the Intelligent auto mode.
•
[POWER SAVE] is fixed to [2MIN.] when [AUTO LCD OFF] is set to [15SEC.] or [30SEC.].
•
The status indicator lights while the LCD monitor is turned off. Press any button to turn on the
LCD monitor again.
•
[AUTO LCD OFF] does not work while operating menu or
•
[POWER SAVE] cannot be used in the following cases.
–
When using the AC adaptor
–
When connecting to a PC or a printer
–
When recording or playing back motion pictures
–
During a slide show
–
[AUTO DEMO]
•
[AUTO LCD OFF] cannot be used in the following cases.
–
When using the AC adaptor
–
When connecting to a PC or a printer
–
While the self-timer is set
–
While recording motion pictures
–
While the menu screen is displayed
–
[AUTO DEMO]
Preparation
The camera is automatically turned off if the camera has not been
used for the time selected on the setting.
Also, it will turn off the LCD monitor automatically when not in use
to prevent discharge of the battery.
p [POWER SAVE]:
The camera is automatically turned off if the camera has not been
used for the time selected on the setting.
[OFF]/[2MIN.]/[5MIN.]/[10MIN.]
[AUTO LCD OFF]:
When taking pictures, the LCD monitor is automatically turned off
if the camera has not been used for the time selected on the
setting.
[OFF]/[15SEC.]/[30SEC.]
- 29 -
touch
zoom.