Programmed Recording - Panasonic PV-L352 Operating Instructions Manual

Programmed Recording

Set a recording start and stop time. Or,
set a 5 or 10 second interval recording
to be done each minute.
1 2 3
, ,
4
REC TIME :
*1 Record 5 seconds each minute.
*2 Record 10 seconds each minute.
03.L352 Basic p17-19
Camera Recording
Before you begin...
• Connect Camcorder to power source.
Use AC Adaptor for longer recordings.
• Insert cassette with record tab (page 11).
• Set POWER to CAMERA.
1
Press MENU for MENU
mode. Press UP or
DOWN to select
PROGRAMMED REC
2
Press DISPLAY.
(Current time is
displayed.)
Each additional press
of DISPLAY increases
start time by 30 minutes.
3
Press DOWN to select
REC TIME
Press DISPLAY
repeatedly to select one
of the options shown at
left.
To cancel the setup, press MENU twice.
4
Press RECORD/PAUSE
to place Camcorder in
stand-by mode.
Recording will be done as scheduled.
Note:
• Start time may not be set over 24 hours from
current time.
• Camcorder shuts off at tape end, or 12 hours
after Interval Recording starts.
• To cancel, set POWER to OFF.
19
.
.
01.12.10, 4:22 PM
19