Stand-By Quick Release; Manual Easy Editing - Panasonic PV-L352 Operating Instructions Manual

Camera Recording
Before you begin...
• Connect Camcorder to power source.
• Insert cassette with record tab (page 11).
b
a c
B
a d
D
, ,

Manual Easy Editing

For proper continuity when taping from
Stop mode or after attaching a new
Battery.
A
Set POWER to VCR.
B
a Press REWIND/SEARCH to rewind
a few seconds of tape.
b Press PLAY to review recording.
c Press STILL where you want to
continue recording.
C
Set POWER to CAMERA.
D
Press RECORD/PAUSE to resume
recording.
18
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com
03.L352 Basic p17-19

Stand-by Quick Release

If left in RECORD/PAUSE mode for 5
minutes, Camcorder switches to Stand-by
mode to conserve battery. When set to ON,
Stand-by Quick Release lets you resume
recording by pressing RECORD/PAUSE two
times. Stand-by Quick Release is set to OFF
at the factory.
1
Set POWER to
CAMERA.
2
Press MENU for
MENU mode.
2 3 4
, ,
Press UP or DOWN
to select
3
Press DISPLAY to select ON/OFF.
ON : From Stand-by mode, press
OFF : From Stand-by mode, set
1 b c
, , ,
A C
,
4
Press MENU to exit.
Easy Edit Stand-by
For a smooth transition between scenes if
recording is stopped, and then started within
24 hours.
a
Press RECORD/PAUSE to stop
recording.
b
Set POWER to OFF and leave cassette
in Camcorder.
c
To resume recording, set POWER to
CAMERA.
d
Press RECORD/PAUSE to resume
recording.
Note:
• Use Manual Easy Edit (left) if more than 24
hours before recording is resumed.
18
STAND-BY RELEASE .
RECORD/PAUSE two times to
resume recording.
POWER to OFF, then to
CAMERA. Press RECORD/
PAUSE to record.
01.12.10, 4:22 PM