Panasonic LUMIX DMC-FX40 Operating Instructions Manual page 75

Note
•
The flash setting is fixed to [Œ].
•
Refer to P159 for information about the available recording time.
•
The available recording time displayed on the screen may not decrease regularly.
•
Depending on the type of the card, the card access indication may appear for a while after
recording motion pictures. This is not a malfunction.
•
Motion pictures can be recorded continuously up to 2 GB. The maximum available recording
time for up to 2 GB only is displayed on the screen.
(DMC-FX40SG)
•
Motion pictures can be recorded continuously for up to 15 minutes. Also, continuous recording
exceeding 2 GB is not possible. (Example: [8m 20s] with [
Remaining time for continuous recording is displayed on the screen.
(DMC-FX40EG/DMC-FX40EP)
•
When motion pictures recorded with the camera are played back on other equipment, the
quality of the picture and sound may deteriorate and it may not be possible to play them back.
Also the recording information may not be displayed correctly.
•
Sound from motion pictures or pictures with audio recorded by this camera cannot be played
back by older models of Panasonic digital camera (LUMIX) launched before July 2008.
•
In motion picture mode, direction detection function cannot be used.
•
In the motion picture mode, [AF MODE] is fixed to [
•
This unit does not support recording motion pictures on MultiMediaCards.
•
Compared to still pictures, motion pictures may have a narrow angle of view.
Advanced (Recording pictures)
] and [STABILIZER] to [MODE1].
- 75 -
])