Using The Viewfinder; Power Supply - Panasonic Digital Palmcorder PV-GS250 Operating Instructions Manual

Using the viewfinder

ª Extending the viewfinder
1
Pull out the viewfinder and extend it by
pulling the extension knob.
ª Lifting up the viewfinder
1
Lift it up by pinching the viewfinder
extension knob.
ª
Adjusting the field of view
1
Adjust the focus by sliding the eyepiece
corrector knob.
12:30:45PM
12:30:45PM 12:30:45PM
OCT 15 2005
OCT 15 2005 OCT 15 2005
≥You can adjust the brightness of the viewfinder
from the menu.
16
LSQT0862
Before using
12:30:45PM
OCT 15 2005

Power supply

ª Charging the battery
When this product is purchased, the battery is not
charged. Charge the battery before using this
product.
≥Battery charging time (
≥We recommend using Panasonic batteries.
≥If you use other batteries, we cannot guarantee
the quality of this product.
≥If the DC input lead is connected to the AC
adaptor, then the battery will not charge.
Remove the DC input lead from the AC adaptor.
1
Connect the AC cable to the AC adaptor and
the AC jack.
2
Put the battery on the battery mount by
aligning the mark, and then securely plug it
in.
ª
Charging lamp
Lights up: Charging
Goes off: Charging completed
Flashing: The battery is over discharged
(discharged excessively). In a while,
the lamp will light up and normal
charging will start.
When the battery temperature is
excessively high or low, the [CHARGE]
lamp flashes and the charging time will
be longer than normal.
)
-17-