Notes And Hints - Panasonic Digital Palmcorder PV-GS13 Operating Instructions Manual

Digital video camcorder
Table of Contents

Advertisement

Available languages

Available languages

NO CARD:
Card is not inserted.
NO DATA:
There are no recorded fi les in the card.
UNPLAYABLE CARD:
You are attempting to play back data which is not
compatible with this Camcorder.
CARD ERROR:
The Card is not compatible with this Camcorder.
COPY INHIBITED:
Because the medium is protected by a copy
guard, images cannot be recorded correctly.
INCORRECT OPERATION:
The Recording Start/Stop Button was pressed
without connecting the USB cable to the PC in
Picture Playback Mode.
CANNOT USE USB
CHANGE MODE:
The USB cable is connected to the Camcorder in
Card Recording Mode or Picture Playback Mode.
CANNOT OPERATE:
You are attempting to record pictures on a Card
while connecting the USB cable to the Camcorder
in Tape Recording/Playback Mode.
UNABLE TO WRITE
(MULTI RECORDING):
The [PHOTO SHOT] Button is pressed when you
are recording pictures on a Tape while setting the
Digital Effect [MULTI] of [EFFECT1].
UNABLE TO WRITE:
The Recording Start/Stop Button is pressed when
you are recording still pictures on the Card.
CASSETTE DOOR OPENED:
Close the Cassette Compartment Cover before
recording.
NO TITLE:
Titles are not recorded.
UNABLE TO WRITE
(WIDE MODE):
You are attempting to record pictures of S1 signal
(with aspect ratio 16:9) by pressing the [PHOTO
SHOT] Button.
FILE LOCKED:
You are attempting to erase protected fi les.
CARD LOCKED:
The write protection switch on the SD Memory
Card is set to [LOCK].
DISCONNECT USB CABLE:
You are attempting to turn the Mode Dial or turn
the Camcorder off in PC Mode while connecting
the USB cable to the Camcorder.
Others

Notes and Hints

Concerning the Power Supply
• When the Camcorder has been used for a long time,
the Camera body becomes warm, but this is not a
malfunction.
• If the [CHARGE] Lamp does not light up although
the Battery is attached to the AC Adaptor, detach the
Battery and reattach it.
Inserting/Removing the Cassette
• In the case of using a previously recorded Cassette,
you can use the Blank Search Function (p. 24) to fi nd
the position where you want to continue recording.
• If a new Cassette is inserted, rewind to the beginning
of the tape before starting recording.
• When inserting the cassette, make sure it faces in
the right direction and then push it in until it stops.
• When the Cassette Holder is in action, do not touch
anything except the [PUSH] mark.
• When closing the Cassette Compartment Cover, do
not get anything caught in the cover, such as a cable
of an optional stereo microphone (PV-GS15 Only).
Alarm Sounds
When [BEEP SOUND] on the [INITIAL] Sub-Menu on
the [TAPE RECORDING MENU] is set to [ON],
confi rmation/alarm beeps are issued as follows.
1 Beep
• When you start recording
• When you switch the [OFF/ON] Switch from [OFF] to
[ON]
2 Beeps
• When you pause recording
2 Beeps 4 times
• If you perform a wrong operation before or during
recording.
Recording Check
• For Recording Check, the recording speed mode
(SP/LP) must be the same as the mode used for
the recording. If different, playback images will be
distorted.
Recording on a Card
• Even if the [SHTR EFFECT] is set to [ON], the
Shutter Effect cannot be recorded on the picture.
• When the colour of the screen changes or blurs,
adjust the shutter speed manually to 1/60 or 1/100.
Photoshot
• Photoshot Recording results in slightly inferior image
quality.
RapidFire Consecutive Photoshot
• One more still picture may be recorded after you
release the [PHOTO SHOT] Button.
• The RapidFire Consecutive Photoshot and Title
Function cannot be used simultaneously.
• When the [SELF TIMER] is set to [ON], the
Camcorder records the maximum number of
recordable pictures depending on the [BURST
MODE] setting.
61

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents