Timers And Others; Sound Quality; Specifications; Play Timer - Panasonic SC-EN37 Operating Instructions Manual

Cd stereo system model no. sc-en37
Hide thumbs Also See for SC-EN37:
Table of Contents

Advertisement

Timers and others

The SLEEP timer can turn the unit off after a set time.
Press [SLEEP] to turn the SLEEP function ON/OFF.
Each time you press the button:
30 MIN
60 MIN
90 MIN
OFF (Canceled)
g To check the remaining time
The play timer and sleep timer can be used together. The sleep timer always has
priority. Be sure not to overlap timer settings.

Sound quality

You can choose one of four types of sound quality.
Press [PRESET EQ] to select the sound quality.
Each time you press the button:
HEAVY
CLEAR
(Adds punch to rock)
(Clarifies higher sounds)
EQ OFF (Canceled)
Live Virtualizer
You can create a three-dimensional sound field when listening to stereo sound.
Press [SURROUND] to turn the Live Virtualizer ON/OFF.
The actual effect depends on the source played.
Specifications
g AMPLIFIER SECTION
RMS OUTPUT POWER both channel driven
simultaneously
10 % total harmonic distortion (THD)
1 kHz
Output impedance
HEADPHONE
MUSIC PORT
DC IN Jack
Terminal
Phone Jack
Terminal
Music Port Jack
Terminal
Option Port
g TUNER SECTION
Frequency range
FM
87.50 MHz to 108.00 MHz (50 kHz)
AM
522 kHz to 1629 kHz (9 kHz)
520 kHz to 1630 kHz (10 kHz)
g CD SECTION
Disc played [8 cm or 12 cm]
(1) CD-Audio (CD-DA)
(2) CD-R/RW (CD-DA, MP3)
(3) MP3
6

Sleep timer

120 MIN
Press [SLEEP] once
EQ
SOFT
(For background music)
VOCAL (Adds gloss to vocals)
Sampling frequency
CD
MP3
Bit rate
3.0 W per channel
MP3
Decoding
16 Ω to 32 Ω
Pick up
14 kΩ
Wavelength
Laser power
DC 14 V
(For Norge)
Bølgelengde
3.5 mm stereo
Laserstyrke
3.5 mm stereo
Audio Output (Disc)
Number of channels
Version 1
Frequency response
Wow and flutter
Digital filter
D/A converter
g SPEAKER SECTION
Type
Speaker Unit(s)
Full Range Speaker
Impedance
Input power
➡ Page 2 for the position of remote control buttons.
You can set the timer to come on at a certain time to wake you up.
Preparation:
Turn the unit on and set the clock.
Prepare the music source you want to listen to; disc, radio, OPTION or music port
source, and set the volume.
 Press [CLOCK/TIMER] repeatedly to select play timer.
CLOCK
Original display
zPLAY
 Within 5 seconds, press [2/u] or [1/i] to set the starting time.
 Press [CLOCK/TIMER] to confirm.
 Repeat steps 2 and 3 to set the finishing time.
To activate the timer
 Press [zPLAY] to turn on the timer.
 Press [^] to turn off the unit.
To
Change the settings
Change the source of volume
Check the settings (when the
unit is on or in standby mode)
Cancel
The timer will start at the preset time, with the volume increasing gradually to the
preset level.
The timer comes on at the set time every day if the timer is on.
The unit must be in the standby mode for the timer to function.
If you turn the unit off and on again while the timer is functioning, the finish time
setting will not be activated.
When MUSIC PORT or OPTION port is selected as the source when the timer
comes on, the system turns on and engages MUSIC PORT or OPTION port as
the source. If you wish to playback from the portable audio equipment, activate
the equipment's play mode and increase the volume. (See the portable audio
equipment's instruction manual.)
44.1 kHz
32 kHz, 44.1 kHz, 48 kHz
g GENERAL
32 kbps to 384 kbps
16/20/24 bit linear
785 nm
CLASS 1
785 nm
Ingen farlig stråling sendes ut
(med sikkerhets-beskyttelse)
2 channel
20 Hz to 20 kHz (+1, -2 dB)
Below measurement limit
8
MASH (1 bit DAC)
Power consumption in standby mode:2.0 W (approx.)
1 Way, 1 Speaker system
Notes:
8 cm cone type 6 Ω
Specifications are subject to change without notice.
6 Ω
Mass and dimensions are approximate.
6 W (MAX)

Play timer

Action
Repeat steps 1 to 4 and 6.
 Press [zPLAY] to clear zPLAY indicator
from the display.
 Make changes to the source or volume.
 Perform steps 5 and 6.
Press [CLOCK/TIMER] repeatedly to select
zPLAY.
Press [zPLAY] to clear the timer
indicator from the display.
Dimensions (W x H x D)
121 mm x 236 mm x 146 mm
Power supply
AC 230 to 240 V, 50 Hz
Power consumption
Dimensions (W x H x D)
220 mm x 236 mm x 146 mm
Mass
With speakers
Without speakers
Operating temperature range
+5 °C to +35 °C
Operating humidity range
5 % to 90 % RH (no condensation)
32 W
3.57 kg
1.27 kg

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sa-en37Sb-en37Sb-en37a

Table of Contents