Discs - Panasonic SC-AKX52 Operating Instructions Manual

Discs

Playing discs
1
Press [x, OPEN/CLOSE] on the main unit to open the disc
tray.
Put in a disc with the label facing up.
Press [x, OPEN/CLOSE] again to close the disc tray.
2
Press [CD] and then press [4/9] to start playback.
Stop
Press [8] during playback.
playback
Pause
Press [4/9] during playback.
playback
Press again to continue playback.
Skip album
Press [R, T].
Skip track
Press [2] or [6] (main unit: [2/3] or
[5/6]).
Search
through
Press and hold [3] or [5] (main unit: [2/3]
track
or [5/6]).
Playmode function
1
Press [PLAY MENU] to select "PLAYMODE".
2
Press [Y, U] and then press [OK] to select the desired mode.
OFF Play all tracks.
PLAYMODE
1-TRACK Play one selected track on the disc.
Press the alphanumeric buttons to select the track.
1-TR
Playback starts from the selected track.
1-ALBUM
1-ALB
Play one selected album on the disc.
Press [R, T] to select the album.
RANDOM Play a disc randomly.
RND
1- ALBUM
RANDOM
Play all tracks in one selected album randomly.
1-ALB RND
Press [R, T] to select the album.
Note:
• This function does not work with "Program playback".
• The setting returns to the default "OFF PLAYMODE" when you open
the disc tray.
Repeat playback
You can repeat "Program playback" or other selected "Playmode
function".
1
Press [PLAY MENU] to select "REPEAT".
2
Press [Y, U] to select "ON REPEAT" and then press [OK].
" " is shown.
To cancel, select "OFF REPEAT".
Viewing available information
You can view the available information on the display panel.
Press [DISPLAY].
Note:
• Maximum characters that can be shown: approximately 32
• This system supports ver. 1.0 and 1.1 ID3 tags.
• Text data that the system does not support can show differently.
8
8
Program playback
This function allows you to program up to 24 tracks.
1
Press [PROGRAM] in the stop mode.
"PGM" is shown.
2
Press the alphanumeric buttons to select the desired track.
Do this step again to program other tracks.
3
Press [4/9] to start playback.
1
Press [PROGRAM] in the stop mode.
2
Press [R, T] to select the desired album.
3
Press [6] and then press the alphanumeric buttons to select
the desired track.
4
Press [OK].
Do steps 2 through 4 again to program other tracks.
5
Press [4/9] to start playback.
Cancel Press [PROGRAM] in the stop mode.
program mode
Replay the
Press [PROGRAM] and then press [4/9].
program
Check program
Press [2] or [6] when "PGM" is shown in the
contents
stop mode.
To check while programming, press [PROGRAM]
two times after "PGM" is shown, then press [2]
or [6].
Clear the last Press [DEL] in the stop mode.
track
Clear all
Press [8] in the stop mode. "CLR ALL" is shown.
programmed
Within 5 seconds, press [8] again.
tracks
Note:
The program memory is cleared when you open the disc tray.
Note on CDs
• This system can access up to 99 tracks.
• This system can play MP3 files and CD-DA format audio CD-R/RW
that have been finalised.
• This system can fail to play some CD-R/RW because of the condition
of the recording.
Note on MP3s
• Files are treated as tracks and folders are treated as albums.
• This system can access up to 999 tracks, 255 albums and 20
sessions.
• Disc must conform to ISO9660 level 1 or 2 (except for extended
formats).
• To play in a certain order, prefix the folder and file names with 3-digit
numbers in the order you want them to play.
Limitations on MP3 playback
• If you have recorded MP3s on the same disc as CD-DA, only the
format recorded in the first session can be played.
• Some MP3s cannot be played because of the condition of the disc or
recording.
• Recordings will not necessarily be played in the order you recorded
them.