Making The Connections - Panasonic SC-AKX52 Operating Instructions Manual

Making the connections

Connect the AC mains lead only after all the other connections have been made.
Conserving power
The system consumes approximately 0.3 W when it is in standby mode. Disconnect the power supply if you do not use the system. Some settings
will be lost after you disconnect the system. You have to set them again.
Connect the antennas
Place the antenna where reception is best.
FM indoor antenna
Connect the speakers
Connect the AC mains lead
Use the included AC mains lead with this
system only.
Do not use an AC mains lead from other
equipment.
Adhesive tape
SPEAKERS
HIGH
(5 )
L
LOW
(4 )
HIGH
(5 )
R
LOW
(4 )
TO SB-AKX52 TO SB-AKX52
To household mains socket
AM loop antenna
Refer to "Using the auxiliary input"
(Z 13) for more information on AUX
connection.
Click!
5
5