Using A Microphone; Remote Control Code; External Equipment - Panasonic SC-AKX52 Operating Instructions Manual

D.BASS
Press [D.BASS] to select "D.BASS", "AUTO D.BASS" or
"OFF D.BASS".
D.BASS Enhances bass effect
AUTO D.BASS Automatically adjusts the bass effect according
to the sound or music track
OFF D.BASS Cancels the function

Using a microphone

Preparation
Decrease the volume of the system to its minimum before you connect
or disconnect a microphone.
1
Connect a microphone (not included) to the microphone
jack.
Plug type : Ø 3.5 mm monaural
2
Turn [MIC VOL, MIN/MAX] on the main unit to adjust the
volume of the microphone.
If you want to use the microphone with background music.
3
Play the music source and adjust the volume of the system.
Note:
• If a strange noise (howling) is emitted, move the microphone away
from the speakers, or decrease the volume of the microphone.
• When you do not use the microphone, disconnect it from the
microphone jack, and decrease the volume of the microphone level
to "MIN".

Remote control code

When other Panasonic equipment responds to the remote control of
this system, change the remote control code for this system.
Preparation
Press [RADIO, EXT-IN] to select "AUX".
To set the code to "REMOTE 2"
1
Press and hold [RADIO, EXT-IN] on the main unit and [2] on the
remote control until "REMOTE 2" is shown.
2
Press and hold [OK] and [2] for a minimum of 4 seconds.
To set the code to "REMOTE 1"
1
Press and hold [RADIO, EXT-IN] on the main unit and [1] on
the remote control until "REMOTE 1" is shown.
2
Press and hold [OK] and [1] for a minimum of 4 seconds.

External equipment

Preparation
• Disconnect the AC mains lead.
• Switch off all equipment and read the appropriate operating
instructions.
Note:
Components and cables are sold separately.
Using the music port
You can play music from a portable audio equipment.
Preparation
Switch off the equaliser (if any) of the portable audio equipment to
prevent sound distortion.
Decrease the volume of the system and the portable audio equipment
before you connect or disconnect the portable audio equipment.
Audio cable
(not included)
1
Connect the portable audio equipment.
Plug type: Ø 3.5 mm stereo
2
Press [RADIO, EXT-IN] to select "MUSIC PORT".
3
Play the portable audio equipment.
Using the auxiliary input
You can connect a VCR, DVD player etc. and listen to the audio
through this system.
1
Connect the external equipment.
2
Press [RADIO, EXT-IN] to select "AUX".
3
Play the external equipment.
Note:
• If you want to connect equipment other than those described, refer
to the audio dealer.
• Sound distortion can occur when you use an adaptor.
Portable audio equipment
(not included)
VCR
(not included)
Rear panel of
this main unit
Audio cable
(not included)
13
13