Computer Adjustment (Auto) - Sanyo PLV-Z3 Owner's Manual

Computer Input

Computer Adjustment (Auto)

The Auto PC adjustment function is provided to automatically adjust Fine sync, Total dots, Horizontal, and Vertical to
conform to your computer. This function can be operated as follows.
1 Select the PC Adjust Menu with the Point Up/Down button, and
then press the Point Right button to enter the sub-menu.
2
Choose the AUTO PC adj. item and then press the SELECT
button.
Auto PC adj.
Automatically adjusts Fine sync, Total dots, Horizontal, and Vertical for
the input signal from your computer.
To store adjustment data
Adjustment parameters from Auto PC adjustment can be memorized
in this projector. Once parameters are memorized, the setting can be
done just by selecting Mode in the PC System Menu (p33). See
"Store" on page 36.
NOTE
●
The Auto PC adjust cannot be operated when 480i", "575i", "480p",
"575p", "720p(HDTV)", "1035i(HDTV)", or "1080i"(HDTV) is selected in the
PC System Menu.
34
PC Adjust Menu
This arrow indicates that there
are other items. Select this
item and press the Point Down
button to go to the next item.