Recording - Panasonic NV-VP31 Operating Instructions Manual

Recording

Recording functions
REC
Direct recording of the
VCR - TV picture.
Timer recording
Recording controlled by timer.
Recording with INTELLIGENT TIMER
Repeating programmed
recordings.
Recording with ShowView
Programming recordings using
the ShowView function.
Recording with external recording controls
Recording is controlled
by an external device.
20
Set the TV set to the video channel and insert a cassette into the VCR;
make sure that the cassette's protection tab is intact.
INPUT
Select channel to record from.
REPEAT
When recording from an external device, select from
Scart inputs AV1, AV2, or the front panel input AV3.
REC
Press REC to start recording.
20
Press STOP
Press PAUSE/SLOW to pause recording.
To protect the video heads this function will be terminated after
approx. 5 minutes.
Press PAUSE/SLOW again to resume recording.
21
REC MODE
Tape speed
23
SETUP
Prior to starting the recording session,
press
SP : normal recording time
LP : double recording time
EP : triple recording time
24
When playing back LP or EP recordings, interferences may occur when
using certain types of cassettes (e.g. Type E-300). These are not
indicative of a VCR malfuncion.
25
to stop recording.
REC MODE to set the tape speed.
- optimal picture quality
- simple picture quality
- reduced picture quality
SP
LP
EP