Cd 9 Remote Control - NAD C 546BEE Owner's Manual

IDENTIFICATION OF CONTROLS

CD 9 REMOTE CONTROL

ON: Switch ON C 546BEE.
CD: Select CD as the active source.
USB: Select USB as the active source.
OPT: Select optical input as the active source.
Not applicable for C 546BEE.
SRC: Toggle to select desired SRC mode. Not
applicable for C 546BEE.
DISP: Show playback time and other display
information.
PROG: Enter or exit program mode.
CLEAR: Delete programmed track/file.
FOLDER [ D/F ] : Select through folder lists.
FILE [ A/S ] : Select through WMA/MP3 files.
ENTER: Select desired folder or WMA/MP3 file.
[ ]: Open or close disc tray.
0 to 9 NUMBER BUTTONS: Direct-entry of
track or file number.
BATTERY ASSEMBLY
Press in and lift tab to remove battery cover out
of recess.
10
Press batteries into opening. Ensure correct
fitting is observed.
OFF: Switch OFF C 546BEE.
RAND: Play tracks/files in random mode.
RPT: Repeat track, file or whole disc.
RPT A-B: Setup repeat sequence.
FILTER: Switch between NORMAL and SLOW
bandwidth.
DIM: Reduce, turn off or restore VFD brightness.
[ ]: Stop playback.
[ ]: Pause playback temporarily.
SKIP [ ] : Go to next track or file.
SKIP [ ] : Go to beginning of current track/
file or to previous track/file.
SCAN [ ]: Fast reverse/forward search.
[ ]: Start playback.
Replace battery cover by aligning and inserting
the two tabs into the holes. Press battery cover
into place until it "clicks" closed.