Projecting Images - Sony QUALINA 004 Owner's Manual

Projecting images

Front
Remote detector
Remote
�������
?
PICTURE /1
������
button
MUTING
�����
button
����� � ���
INPUT
� ����� � ����
buttons
����� ����� ������
����� ���� ������
���� ���� LENS
�����
���� ����
CONT
button
����
����� �����
������� ����
������� �������� ������
���� � ���� � ���� �
����
�����
����
��������
������
26
Rear
Remote detector
Control panel
? /1 FOCUS ZOOM SHIFT
button button button button
INPUT button
1
Press the ?/1 button on the remote or
on the control panel to turn the projector
on.
2
Turn on any equipment connected to the
projector.
3
Press the INPUT button to select the
input source.
INPUT-A Component equipment
connected to the INPUT A
connector on the projector
INPUT-B Equipment connected to the
INPUT B connector on the
projector
DVI Video equipment connected
to DVI-D connector on
projector
HDMI Video equipment connected
to HDMI connector on the
projector
VIDEO Video equipment connected
to the VIDEO (VIDEO IN) jack
on the projector
S-VIDEO Video equipment connected
to the S VIDEO (VIDEO IN)
jack on the projector
4
Adjust the display settings below.
Press the LENS CONT button on the
•
remote repeatedly or the FOCUS
button on the control panel to turn on
the FOCUS setting display. Then, press
the arrow buttons to adjust the focus.
Press the LENS CONT button on the
•
remote repeatedly or the ZOOM button
on the control panel to turn on the
ZOOM setting display. Then, press the
arrow buttons to adjust the size of the
picture.
Press the LENS CONT button on the
•
remote repeatedly or the SHIFT button
on the control panel to turn on the
SHIFT setting display. Then, press the
arrow buttons to adjust the vertical
position of the picture.
Note
• Looking into the lens when the projector is
projecting an image may cause injury to your eyes.
To turn off the picture
Press the PICTURE MUTING button on the
remote. To restore the picture, press the
PICTURE MUTING button again.
continued
27