Panasonic SC-AK270 Operating Instructions Manual page 10

Discs (continued)
Changing a single disc (SINGLE CHANGE)
By main unit only
While one disc is playing, you can change the discs in other trays.
1
Press [0, SINGLE CHANGE].
2
Press [3, 1] ~ [3, 5] to select the desired tray.
3
Change the disc.
4
Press [0, SINGLE CHANGE] again to close the tray.
Checking the track information
You can select a desired disc display mode.
Press [DISPLAY, –DIMMER] during play or pause.
Elapsed play time
Elapsed
play time
Tag Tag
(Artist) (Track)
Note:
• When a title is longer than 8 characters, it will scroll across the
display. The scrolling will start after every 3 seconds.
• "NO TAG" is displayed if titles with tags have not been entered.
• Maximum number of displayable characters: approximately 32
• This unit can display album, track and artist name with MP3 ID3
tags (version 1.0 and 1.1).
• Titles containing text data that the unit does not support cannot
be displayed.
• ID3 is a tag embedded in MP3 track to provide information about
the track.
• Titles entered with 2-byte code cannot be displayed correctly on
this unit.
Advanced play Advanced play
Program play
This function allows you to program up to 24 tracks.
1
Press [6, CD] and then [7, CLEAR].
2
Press [PROGRAM].
"PGM" appears.
3
Press [DISC] and then [1] ~ [5] to select the disc.
4
Press the numeric buttons to select your desired track.
Repeat steps 3 to 4 to program other tracks.
5
Press [6, CD] to start play.
10
RQT8043
Remaining play time
Remaining Album
play time Name
Tag Track
(Album) Name
1
Press [DISC] and then [1] ~ [5] to select the disc.
2
Press [7, CLEAR].
3
Press [PROGRAM].
4
Press [ALBUM ( or )] to select your desired album.
To select an album directly, press the numeric buttons
after pressing [ALBUM (
5
4
Press [4, / REW] or [¢,
To select a track directly, press the numeric buttons after
4
pressing [4, / REW] or [¢,
6
Press [ENTER].
Repeat steps 4 to 6 to program other tracks.
7
Press [6, CD] to start play.
For two-digit track, press [h10] once then the two digits.
For three-digit track, press [h10] twice then the three digits.
To Action
Cancel Press [PROGRAM] in the stop mode.
program mode
Replay the Press [PROGRAM] then [6, CD] in the stop
program mode.
Add to the
program
Repeat steps 3 to 4 in the stop mode.
Repeat steps 4 to 6 in the stop mode.
Check
Press [4,
program
"PGM" is displayed in the stop mode.
contents
The track number, program order and disc
number are displayed:
The program order is displayed followed by the
album number and track number.
Clear the last Press [DEL] in the stop mode.
track
Clear all Press [7, CLEAR] in the stop mode. "CLR ALL"
programmed is displayed. Within 5 seconds, press the
tracks button again to clear all tracks.
Note:
• You cannot program CD-DA together with MP3 tracks.
• The program memory is cleared when you change a disc or open
the disc tray.
• You cannot program more than one disc.
or )].
3
/ FF] to select the track.
3
/ FF].
4 3
/ REW] or [¢, / FF] when
Program
Track
order
number