Panasonic SC-AK270 Operating Instructions Manual page 16

Cd stereo system
Table of Contents

Advertisement

Using other equipment (continued)
Connecting and playing a USB mass storage
Connecting and playing a USB mass storage
device
device
The USB connectivity enables you to connect and play MP3 tracks
from USB mass storage class. Typically, USB memory devices.
(Bulk only transfer)
Preparation
Before connecting any USB mass storage device to the unit, ensure
that the data stored therein has been backed up.
It is not recommended to use a USB extension cable. The USB
device is not recognised by this unit.
USB enabled device
(not included)
It is not recommended
to use a USB extension
cable. The device
connected via the cable
will not be recognised by
this unit.
1
Reduce the volume and connect the USB mass storage
device.
2
Press [6, USB] to start play.
Other basic operations
To
Action
Pause play
Press [6, USB].
Press again to resume play.
Stop play
Press [7, CLEAR].
"RESUME" is displayed. The position is
memorised.
Press [6, USB] to resume play.
Press [7, CLEAR] again to clear the position.
Skip tracks
Press [4,
Skip album
Press [ALBUM (
Press [ALBUM (
the numeric buttons in the stop mode.
16
RQT8043
4
3
/ REW] or [¢,
/ FF].
or
)] in the play mode.
or
)] once and then
Recording from a USB mass storage device
1
4
Press [4,
/ REW ] or [¢,
track for recording.
2
Press [¶ REC, TAPE] on the main unit to start recording.
Compatible devices
Devices which are defi ned as USB mass storage class:
– USB devices that support bulk only transfer.
– USB devices that support USB 2.0 full speed.
Supported format
Files must have the extension ".mp3" or ".MP3".
Note:
• CBI (Control/Bulk/Interrupt) is not supported.
• A device using NTFS fi le system is not supported.
[Only FAT 12/16/32 (File Allocation Table 12/16/32) fi le system is
supported].
• Depending on the sector size, some fi les may not work.
• This unit can access up to 255 albums (including blank folders)
and 2500 tracks.
• The maximum number of tracks in a folder are 999 tracks.
• Only one memory card will be selected when connecting a
multiport USB card reader. Typically the fi rst memory card
inserted.
• Disconnect the USB card reader from the unit when you remove
the memory card. Failure to do so may cause malfunction to the
device.
• When you connect your digital audio player to the USB port,
it charges all the time except in standby mode or during tape
recording.
3
/ FF] to select the desired

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents