[Protect] - Panasonic Lumix DMC-FX70 Operating Instructions Manual

You can set protection for pictures you do not want to be deleted by mistake.
Select [PROTECT] on the [PLAYBACK] Mode menu.
Touch [SINGLE] or [MULTI].
Select the picture.
[SINGLE] setting
Drag the screen horizontally to
select an image, and then touch
[SET].
•
You can forward or rewind pictures
continuously by keeping your finger on
the left or right sides of the screen after
forwarding/rewinding a picture.
(Pictures are displayed reduced in size)
•
Setting is cancelled by touching
[CANCEL].
[MULTI] setting
Touch the picture you wish to
protect.
•
Switch the screen by touching [3]/[4]
if these are displayed on the slide bar.
•
Setting is cancelled by touching the
same picture again.
Touch [EXIT] to return to the menu screen.
•
Touch [EXIT] to close the menu.
∫ Cancelling all the [PROTECT] settings
1
Touch [CANCEL] on the screen shown in step
2
Touch [YES].
3
Touch [EXIT] to close the menu.
•
If you touch [CANCEL] while cancelling protection, the cancelling will stop halfway.
Note
•
The protect setting may not be effective on other equipment.
•
Even if you protect pictures in the built-in memory or a card, they will be deleted if the built-in
memory or the card is formatted.
•
Even if you do not protect pictures on a card, they cannot be deleted when the card's
Write-Protect switch is set to [LOCK].
Advanced (Playback)

[PROTECT]

[SINGLE]
2
.
- 146 -
(P23)
[MULTI]