(Programme List Search) - Panasonic NV-SJ410 Series Operating Instructions Manual

To Cancel the Programming of a Timer
Recording
It is not possible to cancel a programming while the timer
recording is being performed.
≥ Display the VCR picture on the TV.
≥ Set the VCR/TV switch
1 Press the PROG./CHECK
button to display the timer
recording programmings on the
TV screen.
2 Press the Cursor buttons (34)
programming that you want to cancel.
3 Press the CANCEL button
4 Press the EXIT button
the On Screen Display.
Notes for Cancelling the Programming of a Timer
Recording
In some cases, for example as listed below, the
programming of a timer recording remains stored in the
memory until 4 a.m. the next day. However, this is not a
malfunction.
≥ When a timer recording was not performed up to the TV
programme's ending time because the remaining tape
time was not sufficient.
≥ When you have stopped the timer recording while it was
being performed.
To Check the Total Timer Recording
Programming Time
The total time indication for timer
recording programming lets you check
how many programmes can be
recorded by comparing with the
remaining tape time in the VCR
display.
≥ The total time is calculated in the SP mode.
≥ The total time cannot be calculated when setting Daily/
Weekly timer recording.
to "VCR".
Timer recording
Pos Start Stop SP VPS
Name DATE ON OFF LP PDC Min
ZDF 27/10 We 20:00 21:30 SP ON
ARD 30/10 Sa 19:00 20:00 LP ON
N3 Su 21:00 23:30 SP ON
ZDF Su-Sa 17:30 18:00 LP ON
jjjjj jj/jj jj jj:jj jj:jj jj jjj
jjjjj jj jj jj jj jj jj jj jj jjj
jjjjj jj jj jj jj jj jj jj jj jjj
to select the
jjjjj jj jj jj jj jj jj jj jj jjj
.
Timer recording
Pos Start Stop SP VPS
Name DATE ON OFF LP PDC Min
ZDF 27/10 We 20:00 21:30 SP ON
to exit
ARD 30/10 Sa 19:00 20:00 LP ON
jjjjj jj/jj jj jj:jj jj:jj jj jjj
ZDF Su-Sa 17:30 18:00 LP ON
jjjjj jj/jj jj jj:jj jj:jj jj jjj
jjjjj jj jj jj jj jj jj jj jj jjj
jjjjj jj jj jj jj jj jj jj jj jjj
jjjjj jj jj jj jj jj jj jj jj jjj
jjjjj jj jj jj jj jj jj jj jj jjj
jjjjj jj/jj jj jj:jj jj:jj jj jjj
jjjjj jj/jj jj jj:jj jj:jj jj jjj
jjjjj jj/jj jj jj:jj jj:jj jj jjj
jjjjj jj/jj jj jj:jj jj:jj jj jjj
jjjjj jj/jj jj jj:jj jj:jj jj jjj
Total (SP)
6:07:30 16.10.05
Indication for a total timer
recording programming time
of 90 minutes
To select a Timer-Recorded
Programme from the List and
Quickly Locate Its Beginning for
Automatic Playback

(Programme List Search)

This VCR can display a list of the timer-recorded programmes
90
60 on the inserted video cassette on the TV screen. You can then
150
30
select the desired programme, and the VCR will quickly locate
jjj
jjj
jjj
its beginning and start playback.
jjj
Conditions for correct operation of the Programme List
Search function:
≥ The video cassette must not have been ejected after the
90
60
timer recordings were performed.
jjj
30
jjj
≥ The tape length of the inserted cassette must be set
jjj
jjj
jjj
correctly.
≥ The VCR must not be in the timer recording standby mode.
≥ A programme of at least 15 minutes must be recorded on
the tape.
≥ If a timer recording was performed onto a recorded video
cassette, the previous recording must have been
completely erased by the new recording.
Preparation
≥ Display the VCR picture on the TV.
Opearations
1 Press the SEARCH button
display the Programme List
menu.
2 Press the Cursor buttons (34)
the programme that you want to locate and play back.
jjj
jjj
3 Press the SEARCH button
jjj
jjj
jjj
for the beginning of the selected programme.
jjj
90
≥ After the desired recorded programme has
been found, playback starts automatically.
≥ If, after playback has started, you want to search
for the beginning of the same or another programme,
press the SEARCH button
Playback stops, and the Programme List menu
appears.
Repeat the above operations steps 2
To Cancel the Programme List Search:
Press the EXIT button
Hints:
≥ When you press the SEARCH button
step 1, the last timer-recorded programme is selected
(highlighted).
≥ If you take out the cassette or insert another cassette after
a timer recording has finished, pressing the SEARCH
button activates the Intro-Jet Scan instead of the
Programme List Search. (Refer to page 22.)
≥ If you programme linked timer recordings, Programme List
Search function does not work.
Programme List
to
Pos Name Date
2 ZDF 27/10 We 17:46
3 ARD 28/10 Th 15:00
to select
to start the search
.
–
3.
.
in the operation
Start
21