Panasonic Lumix DMC-LX5 Operating Instructions Manual page 76

Digital camera model no. dmc-lx5
Table of Contents

Advertisement

When [PICTURE SIZE] is set larger than [
with [ISO6400]/[ISO12800] set ([ISO4000] to [ISO12800] when [ISO INCREMENTS] is set to
[1/3 EV]), [PICTURE SIZE] will get smaller as shown below:
Aspect ratio setting
When [ISO6400]/[ISO12800] is set ([ISO4000] to [ISO12800] when [ISO INCREMENTS] is set
to [1/3 EV]), the following functions cannot be used.
[
], [
] or [
Extra Optical Zoom
[i.ZOOM]
[DIGITAL ZOOM]
The ISO sensitivity will be set to [AUTO] when recording motion pictures. Also, the
[ISO LIMIT SET] will not operate.
Setting items below will be selectable in Creative Motion Picture Mode.
[AUTO]/[400]/[800]/[1600]/[3200]/[6400]
∫ About [
] (Intelligent ISO sensitivity control)
The camera automatically sets the optimum ISO sensitivity and shutter speed to suit the
movement of the subject and brightness of the scene to minimise the jitter of the subject.
The shutter speed is not fixed when the shutter button is pressed halfway. It is continuously
changing to match the movement of the subject until the shutter button is pressed fully. Confirm
the actual shutter speed on the information display for the picture being played back.
Note
The higher the value set for the ISO sensitivity, the more the jitter is reduced but the greater the
amount of picture noise.
Refer to
P70
for the flash range.
Depending on the brightness and how fast the subject is moving, jitter may not be avoided even
if [
] is selected.
Movements may not be detected when a moving subject is small, when a moving subject is at
the edge of the screen or when a subject has moved at the very moment when the shutter
button was pressed fully.
The setting is fixed to [
In [SPORTS], [BABY1]/[BABY2], [PET] and [FLASH BURST] in Scene Mode
Programme Shift cannot be activated when the ISO sensitivity is set to [
You cannot select [
Fixed to [AUTO] except for [CUSTOM] in My Colour Mode.
To avoid picture noise, we recommend reducing the ISO sensitivity, setting
[NOISE REDUCTION] in [FILM MODE] towards [_] or setting the items except
[NOISE REDUCTION] towards [`] to take pictures.
Advanced (Recording pictures)
1:1
4:3
3:2
16:9
] in [QUALITY]
] in the following cases.
] in Shutter-Priority AE Mode and Manual Exposure Mode.
] (1:1), [
] (4:3), [
/
/
(P125)
- 76 -
] (3:2), or [
Picture size
>
/
/
>
/
>
/
>
/
].
] (16:9)

Advertisement

Table of Contents
loading

Table of Contents