Attach a filter.
•
Rotate the filter slowly and carefully.
B MC protector
C ND filter
D PL filter
•
Ensure that the screw parts of the lens adaptor and the filter are properly tightened.
Note
•
Lens adapter (DMW-LA6; optional) is needed to use the filter.
•
Do not attach multiple filters at the same time.
•
If the filter is tightened too much, you may not be able to remove it. Do not tighten it too much.
•
If the filter is dropped, it may be destroyed. Be careful not to drop it when attaching it to the
camera.
•
Be careful not to get a fingerprint, dirt, etc., on the filter when it is attached, otherwise the focus
may be adjusted to the lens, resulting in the subject being out of focus.
•
Refer to the instructions for each filter for details.
•
Turn off the camera when removing the filter.
•
The supplied lens cap cannot be attached while the lens adaptor and the filter are attached.
Others
- 204 -