Connections - Panasonic NV-SJ200 Series Operating Instructions Manual

Connections

This section shows you how to connect the VCR to an aerial, TV, etc.
When the VCR is turned on after
unpacking and connecting the aerial
cable and the mains lead, Plug in Auto
Tuning starts automatically.
Basic Connections
The following connections are required to
record and play back the video cassette
through the TV.
AC Input socket
To mains supply
Connections to a TV using the Audio/Video Input Sockets
(For NV-SJ200BD and NV-SJ205 series)
Set the RF out put channel of the VCR to
"ss" (RF OFF) when the VCR is connected
to the TV via the Audio/Video cable.
(See page 8.)
AC Input socket
To mains supply
TV Set (Not supplied)
2
Aerial Connector
AC IN~
SECTEUR~
3
TV Set (Not supplied)
Aerial Connector
2
AUDIO IN
3
AC IN~
SECTEUR~
4
Aerial (Not supplied)
1
IN
IN (AV1) OUT
RF
VIDEO
OUT
AUDIO
Aerial (Not supplied)
1
VIDEO IN
(Not supplied)
IN
IN (AV1) OUT
RF
VIDEO
OUT
AUDIO
AUDIO OUT
Aerial Input socket
Aerial Output socket
Aerial Input socket
Aerial Output socket
/ VIDEO OUT
7