Table of Contents
Advertisement
$ Antenna or Cable Connections
Y
"te
"P
i
(Flat)Twin Lead
HF/VHF
Ss
Outdoor Antenna Connection
IR a a
GAL
e
Unhook the antenna from your previous TV
(Round) 75 Ohm
net supped)
Y)
or VCR
and connect
it to the back of the
coaxial Cable
we
=
If your antenna system has separate UHF
|
a<
or
a.
E
and VHF lead-ins, you need a UHF/VHF
300-75 ohm
Band Mixer (not supplied).
from
Transformer
Antenna
(not supplied)
K
e
Back of —
(Flat) Twin Lead
Combination VCR
300 Ohm Cable
Cable Connections
(A) Without a Converter/Descrambier Box
With this connection, you can: use your
(A)
Combination VCR remote control to select
channels for viewing and select unscrambled
from CATV
channels for timer recording. Scrambled
(cable)
channels may not be viewed or recorded with
this connection.
Back of Combination VCR
(B) With a Converter/Descrambler Box
With this connection, you may record and view
(B)
any channel including scrambled channels.
Please note, however that channel selection
must be made at the cable company converter
box. Timer recording is limited to one channel at
a time, and you can only view the channel you
are recording.
from CATV
To Watch and Record Scrambled/
(cable)
Unscrambled Channels
Set the Combination VCR to the output channel
of the cable converter box (e.g. CH3).
Now, select channels to be viewed or recorded at
the cable converter box.
FCC WARNING:
Any unauthorized changes or
modifications to this equipment would void the
user's authority to operate.
Note to CATV System Installer
-
This reminder is provided to call the CATV (Cable TV)
System Installers attention to Article 820-40 of the
NEC that provides guidelines for proper grounding
and, in particular, specifies that the cable ground shall
be connected to the grounding system of the building,
as close to the point of cable entry as practical.
Advertisement
Table of Contents
