Panasonic NV-MX300B Operating Instructions Manual page 30

SHUTTER/IRIS
AUTO
MNL
AE LOCK
VOL/JOG
W.B
MENU
Title
Recording with Special Effects
(Digital Effects) (Continued)
∫ Wipe Mode
It gradually replaces a still picture of the last recorded
scene with the moving picture of the new scene, like
drawing a curtain.
WIPE
WIPE
WIPE
∫ Mix Mode
It gradually fades out a still picture of the last recorded
scene while fading in the moving picture of the new
scene.
MIX
MIX
MIX
58
CAMERA FUNCTIONS
1.CAMERA SETUP
2.ADVANCED FUNCTIONS
3.DIGITAL EFFECT
4.CARD SETUP
5.MULTI-PICTURES
6.RECORDING SETUP
7.DISPLAY SETUP
8.OTHER FUNCTIONS
9.DEMO MODE
PRESS MENU TO EXIT
DIGITAL EFFECT
EFFECT OFF MULTI P-IN-P
WIPE MIX STROBE
GAINUP B/W
RETURN
---- YES
PRESS MENU TO EXIT
Procedure
1 2
Set [WIPE] from Press the Recording
[EFFECT] on the Start/Stop Button to
[DIGITAL EFFECT] Sub- start recording.
Menu, and exit from the The normal recording
Menu. (p. 50) starts.
The [WIPE] Indication
appears.
MENU
SHUTTER/IRIS
VOL/JOG
" #
Set [MIX] from Press the Recording
[EFFECT] on the Start/Stop Button to
[DIGITAL EFFECT] Sub- start recording.
Menu, and exit from the The normal recording
Menu. (p. 50) starts.
The [MIX] Indication
appears.
MENU
SHUTTER/IRIS
VOL/JOG
3 4
Press the Recording Press the Recording
Start/Stop Button to Start/Stop Button to
pause recording. start recording again.
The [WIPE] Indication The last picture of the
changes to [B]. previous scene is
≥The last picture is gradually replaced by the
stored in memory. new scene.
$ %
Press the Recording Press the Recording
Start/Stop Button to Start/Stop Button to
pause recording. start recording again.
The [MIX] Indication The last picture gradually
changes to [C]. fades out while the new
≥The last picture is scene fades in.
stored in memory.
Remarks, etc.
≥If you perform any of the following operations after
performing Step 3 or $, the picture stored in memory
is erased and the Wipe or Mix Functions cannot be
used:
Selecting any other digital function on the [DIGITAL
≥
EFFECT] Sub-Menu.
Using the Camera Search Function.
≥
Pressing the [STILL] Button.
≥
Switching the [TAPE/CARD] Selector.
≥
Wipe from a Photoshot Still Picture
Instead of performing the Wipe from the last recorded
picture, you can store a still picture in memory by
pressing the [PHOTO SHOT] Button after Step 1 and
then perform Step 4.
Mix from a Photoshot Still Picture
Instead of performing the Mix from the last recorded
picture, you can store a still picture in memory by
pressing the [PHOTO SHOT] Button after Step " and
then perform Step %.
59