Panasonic NV-MX300B Operating Instructions Manual page 23

6
1 5
REW/ 6 PLAY FF/ 5
SLOW SLOW
;
STILL ADV PAUSE/ITEM STILL ADV
∫
: 9
INDEX STOP/SET INDEX
Title
Searching for the Beginning of
Recorded Scenes Marked with
Index Signal
(Index Search)
∫ Searching for Photoshot Pictures
(Photoshot Index Search)
≥Slide the [OFF/ON/MODE] Switch from the [ON]
position to put the Movie Camera in the VCR Mode.
≥Set [SEARCH] on the [PLAYBACK FUNCTIONS]
Sub-Menu to [PHOTO].
∫ Searching for the Beginning of Recorded
Scenes (Scene Index Search)
≥Slide the [OFF/ON/MODE] Switch from the [ON]
position to put the Movie Camera in the VCR Mode.
≥Set [SEARCH] on the [PLAYBACK FUNCTIONS]
Sub-Menu to [SCENE].
44
VCR Mode
PLAYBACK FUNCTIONS
BLANK SEARCH ---- YES
RECORD TO CARD ---- YES
AUTO PRINT ---- YES
SEARCH PHOTO SCENE
12bit AUDIO ST1
AUDIO OUT STEREO
---- YES
RETURN
PRESS MENU TO EXIT
CAMERA Mode
SHUTTER/IRIS
RECORDING SETUP
AUTO
REC SPEED SP
MNL
AUDIO REC 12bit
SCENEINDEX 2HOUR
AE LOCK
WIND CUT OFF
ZOOM MIC OFF
VOL/JOG
W.B
MENU
RETURN ---- YES
PRESS MENU TO EXIT
Procedure
Photoshot Index Search Photoshot Index Search
in Forward Direction in Reverse Direction
Press the Index Button Press the Index Button
[9] on the Remote [:] on the Remote
Controller. Controller.
9
INDEX
Scene Index Search in Scene Index Search in
Forward Direction Reverse Direction
Press the Index Button Press the Index Button
[9] on the Remote [:] on the Remote
Controller. Controller.
9
INDEX
∫ Index Search
To allow easy searching for desired scenes, this
Movie Camera automatically records index
signals during recording as follows:
(While an index signal is
being recorded, the
[INDEX] Indication flashes
for a few seconds.)
Photoshot Index Signal
To search for still pictures recorded in the
Photoshot Mode (p. 30) and to use for Automatic
Printing Function. (p. 106)
A photoshot index signal is automatically
recorded every time you record a still picture in
the Photoshot Mode.
However, in the Continuous Photoshot Mode
DAY
(p. 31), no photoshot index signals are recorded.
≥At every press of the corresponding button, the tape
is fast-forwarded or rewound to the next still picture
recorded in the Photoshot Mode.
After reaching the next still picture, the still picture is
played back continually, however the sound only for
approximately 4 seconds. (If you leave the Movie
Camera in the Still Playback Mode for more than
6 minutes, it switches over to the Stop Mode to
protect the video heads against excessive wear.)
:
INDEX
≥When you briefly press the corresponding button
once, the [S 1] Indication appears and the search
for the next scene marked with an index signal
starts.
After the Scene Index Search has started, every
time you press the button, the indication changes
successively from [S 2] to [S 9], and the beginning
of the scene corresponding to the selected number
is located.
After reaching the desired scene, playback starts
:
automatically.
INDEX
(At a time, Scene Index Search in forward or
reverse direction is possible up to the ninth scene
marked with index signal from the present tape
position.)
S 3
Scene Index Signal
To search for the beginning of recorded scenes.
A scene index signal is automatically recorded in
the following cases:
≥When you start recording after inserting a
INDEX
cassette. However, if you switch the Movie
Camera from the VCR Mode over to the
Camera Mode or set the date and/or time
before you start recording, no index signal
is recorded.
≥According to the setting of [SCENEINDEX] on
the [RECORDING SETUP] Sub-Menu of the
[CAMERA FUNCTIONS] Main-Menu:
[2HOUR]: An index signal is recorded when
recording is restarted after a lapse of
more than 2 hours.
[DAY]: An index signal is recorded when
recording is restarted after the date
has changed since the last
recording.
Remarks, etc.
≥The Photoshot Index Search Function may not work
correctly for still pictures recorded near the beginning
of the tape.
≥As no photoshot index signals are recorded for still
pictures recorded in the Continuous Photoshot Mode
(p. 31), the Photoshot Index Search Function cannot
be used to search for these still pictures.
≥If you keep the [:] or [9] Button pressed for
more than 2 seconds, the Intro Search Function is
activated and it plays back all still pictures recorded
in the Photoshot Mode on the cassette one after
another for a few seconds each.
(To cancel the Intro Search Function, press the Play
Button [1] or the Stop Button [∫].)
≥If the interval between two scene index signals is less
than 1 minute, the Scene Index Search Function may
not work correctly.
≥The Scene Index Search Function may not work
correctly for scenes recorded near the beginning of
the tape.
≥If you keep the [:] or [9] Button pressed for
more than 2 seconds, the Intro Search Function is
activated and it plays back the beginning of all
scenes marked with an index signal on the cassette
one after another for a few seconds each.
(To cancel the Intro Search Function, press the Play
Button [1] or the Stop Button [∫].)
45