Panasonic Lumix DMC-FS35 Operating Instructions Manual page 15

Using an AC Adaptor (optional) and a DC Coupler (optional) instead of the
The AC Adaptor (optional) can only be used with the designated Panasonic DC
Coupler (optional). The AC Adaptor (optional) cannot be used by itself.
1 Open the card/battery door.
2 Insert the DC Coupler, being careful of the
direction.
3 Open the DC Coupler cover A.
• Push open the Coupler cover from the interior.
4 Close the card/battery door.
• Ensure that the card/battery door is closed.
5 Plug the AC Adaptor into an electrical outlet.
6 Connect the AC Adaptor B to the [DC IN] socket
C of the DC Coupler.
D Align the marks and insert.
• Ensure that only the AC Adaptor and DC Coupler for
this camera are used. Using any other equipment may
cause damage.
Note
• Always use a genuine Panasonic AC Adaptor (optional).
• When using an AC Adaptor, use the AC cable supplied with the AC Adaptor.
• Some tripods cannot be attached when the DC Coupler is connected.
• Make sure to unplug the AC Adaptor when you open the card/battery door.
• If the AC Adaptor and DC Coupler are not necessary, then remove them from the digital
camera. Also, please keep the DC Coupler cover closed.
• Also read the operating instructions for the AC Adaptor and DC Coupler.
Preparation
battery

- 15 -
