Display Related - Samsung R65 Manual

Display Related

Q1 The LCD screen is too dark or too bright.
A Adjust the LCD screen brightness. Use the <Fn> + <
Q2 The screen saver disturbs screen viewing during Media Player or
A Unselect Tools > Option > Player > Allow screen saver during playback in the
Q3 In DOS mode, changing the full screen DOS mode by pressing
A The DOS mode which supports 2 Byte characters such as Korean and Japanese
Q4 In the following cases, the screen blinks or displays noise for a
A This may happen while the video driver is examining the connected device.
Q5 When I connect a projector, and change the setting to display
A Press <Fn>+<
Q6 The desktop momentarily appears as a broken image when
A Since zooming in or out of the Media Player screen changes the screen resolu-
Manual
7-10
video file operation.
Media Player.
<ALT>+<Enter> key displays a broken image for a short period.
runs in graphic not in text mode. In this case, a broken image may be displayed
while changing the video mode settings.
short time (This only applies to nVidia graphics card.):
(Click the Graphics Related tab, Change Resolution, Change Display Device,
Remove the AC Adapter, Restart the System, Change PowerMizer level.)
While detecting, any connected display devices may blink or some noise may
occur.
screen image on both the LCD and the projector by pressing
<Fn>+< > keys, screen is not displayed properly.
> keys once again.
If the same problem continues, it means the projector cannot support the resolu-
tion. Lower the resolution to 1024 x 768.
zooming in or out of the Media Player screen when Media
Player is running.
tion, the desktop may momentarily appear as a 'broken image' during this oper-
ation.
>, <Fn> + < > keys.