Table of Contents
Advertisement
Using Both DHCP and Static IP Simultaneously
N N
N N
1. Click Start > Control Panel > Network and Internet Connections >
2. Select the Internet Protocol (TCP/IP) item, and then click Properties.
3. In the Alternate Configuration tab, click User configured, and then enter
4. When the configuration has been completed, click OK.
Manual
4-6
When you are alternatively using networks with either DHCP or static IP address-
ing, you can use alternative settings that enable simultaneous configurations of
DHCP and static IP to use both of the network connections without reconfiguring.
o o
t t
e e
o o
t t
e e
This function is provided only when your operating system is Windows XP.
Network Connections > Local Area Connection, press the right button
of the touchpad, and then select Properties.
the appropriate values for the following:
(IP address, Subnet mask, Default gateway, Preferred and alternate DNS server,
Preferred and alternate WINS server)
Now you can connect to both networks using DHCP and static IP respectively.
Advertisement
Table of Contents
