Step 3: Connections - Panasonic SC-BTT195 Operating Instructions Manual

STEP 3: Connections

Turn off all equipment before connection and read the appropriate operating instructions.
Do not connect the AC mains lead until all other connections are complete.
Speaker connection
Connect the speaker cables to the terminals of the same colour.
Connection to a TV
∫ HDMI
≥ Use the High Speed HDMI cables. Non-HDMI-compliant cables cannot be utilized.
It is recommended that you use Panasonic's HDMI cable. When outputting 1080p signal, please use
HDMI cables 5.0 meters or less.
Recommended part number (High Speed HDMI Cable):
RP-CDHS15 (1.5 m), RP-CDHS30 (3.0 m), RP-CDHS50 (5.0 m), etc.
≥ Audio will be output through the system's speakers when "Off" is selected in "HDMI Audio Output". (
∫ TV Audio
≥ To output TV audio from this unit's speakers, you need to switch the selector. (
∫ OPTICAL IN
≥ After making the digital audio connection, make settings to suit the type of audio from your digital
equipment. ( 35)
HDMI cable (not supplied)
If the HDMI terminal on the TV is labelled "HDMI (ARC)", the connection of the optical digital audio cable is not required.
*1
It is also possible to use an audio cable instead of the optical digital audio cable. In this case, connect the AUX terminal on
*2
the main unit with the audio output terminal on the TV.
What is ARC?
ARC is an abbreviation of Audio Return Channel, also known as HDMI ARC. This feature allows a home
theatre system to receive and play audio from the TV through a signal HDMI cable without additional wiring.
14
VQT4A16
OPTICAL
AUDIO OUT
HDMI OUT
L
R
Optical digital audio cable*
(not supplied)
35)
19)
Audio cable*
2
(not supplied)
1