Sharp UX-A450 Operation Manual page 9

COPY/HELP/POLL key
8
When a document is in the feeder, press this key to make a copy of a
document. When a document is not in the feeder, press this key to print out
the Help List, a quick reference guide to the operation of your fax machine.
This key is also used after dialling to poll (request fax transmission from)
another machine.
START/MEMORY key
9
Press this key after dialling to begin fax transmission. Press this key before
dialling to send a fax through memory.
RESOLUTION / RECEPTION MODE key
10
When a document is in the feeder, press this key to adjust the resolution for
faxing or copying. At any other time, press this key to select the reception
mode (an arrow in the display will point to the currently selected reception
mode).
FUNCTION key
11
Press this key followed by the arrow keys to select special functions and
settings.
R key
12
If you are on a Flash-type PBX, use this key to dial out (first press the R key
and then dial the number).
13 UP and DOWN arrow keys
Enlarge/reduce setting: When making a copy of a document, press these
keys to select an enlarge/reduce setting.
Volume setting: When a document is not in the feeder, press these keys to
change the speaker volume when the
volume at any other time.
FUNCTION key settings: Press these keys after pressing the FUNCTION
key to scroll through the FUNCTION MODE settings.
14
key
Press this key to listen to the line and fax tones through the speaker when
faxing a document.
REPEAT key
15
Press this key while listening to a message to play it again.
16 SKIP key
Press this key while listening to a message to skip to the next message.
DELETE key
17
Press this key to erase recorded messages.
key has been pressed, or the ringer
7