Sharp UX-A450 Operation Manual page 33

Automatic fax reception YES: The reception mode will switch to FAX mode,
allowing the machine to continue to receive faxes automatically. With this
setting, you can still use the remote commands to listen to your messages
and then erase them (see Remote Operations on page 37).
Automatic fax reception is set to NO at the factory before shipping. If you want
to set it to YES, press the panel keys as follows:
1
FUNCTION
Press
2
Press once and
3
Press .
4
Press to turn on automatic fax
1
reception, or
STOP
5
Press
OGM only mode
If needed, you can turn off recording of incoming messages. In this case, your
outgoing message will play, but callers will not be able to leave a message.
(The machine will still receive faxes sent by automatic dialling.)
1
FUNCTION
Press
2
Press once and
once and once.
twice.
to turn it off.
2
to return to the date and time display.
once and once.
once.
Optional Answering Machine Settings
Display:
A.M. SETTING
ON A.M. FAILURE
1=YES, 2=NO
The display briefly shows
your selection, then:
OGM ONLY MODE
Display:
A.M. SETTING
OGM ONLY MODE
31