Sending Faxes; Receiving Faxes - Sharp UX-60 Operation Manual

all-UX84H.book Page 3 Wednesday, July 5, 2000 8:48 AM

Sending Faxes

Place your document
(up to 5 pages) face
down in the document
feeder.
Normal Dialling
1. Lift the handset or press
2. Dial the fax number.
3. Wait for the reception tone (if a person
answers, ask them to press their Start
key).
START/
4. Press:
MEMORY
Rapid Key Dialling
Press the appropriate Rapid Key.
Transmission will begin automatically.
Speed Dialling
SPEED
1. Press:
DIAL
2. Enter 2-digit Speed Dial number.
3. Press:
START/
MEMORY

Receiving Faxes

Press the RESOLUTION/RECEPTION
MODE key until the arrow in the display
points to the desired reception mode (make
sure the document feeder is empty).
RESOLUTION/
RECEPTION MODE
FAX mode: The fax machine automatically
answers on the set number of rings and
receives the incoming document.
TEL mode:
SPEAKER
TEL/FAX mode: This mode is convenient
for receiving both faxes and voice calls.
When a call comes in, the fax will detect
whether it is a voice call (including manually
dialled fax transmissions), or an
automatically dialled fax.
A.M. mode: Select this mode when you go
out to receive both voice messages and
faxes.
Recording an Outgoing
Message
1. Press:
2. Press:
3. Press 1 (GENERAL) to record an outgo-
4. Pick up the handset, press the START/
TEL FAX
05 NOV 10:30
TEL/FAX A.M.
5. When finished, press the STOP key and/
TEL FAX
05 NOV 10:30
TEL/FAX A.M.
6. Press:
TEL FAX
05 NOV 10:30
TEL/FAX A.M.
TEL FAX
05 NOV 10:30
TEL/FAX A.M.
Quick Reference Guide
Beep
RECEIVING
FUNCTION
0
Display shows:
OGM RECORDING
START/
MEMORY
ing message for the answering machine.
Press 2 (TRANSFER) to record an outgo-
ing message for the Transfer function.
MEMORY key, and speak into the handset
to record your message.
or replace the handset.
STOP
START/
MEMORY
3