Table of Contents
Advertisement
8
Option
Settings
The option settings let you customise your fax to better suit your needs.
An initial setting has been made for each option at the factory. You can
change a setting by following the steps described for each option below.
FUNCTION
Setting 1: FINE RESOLUTION PRIORITY
This option sets the default resolution (the resolution used if a setting is not
made with the RESOLUTION key) for transmitting documents. Press 1
(YES) to set the default resolution to FINE, or 2 (NO) to set it to STANDARD.
Initial setting: 2
FUNCTION
4
YES
or
1
Setting 2: GREY SCALE SETTING
This sets the grey scale used for the HALF TONE resolution setting. Press 1
for 16 levels (this gives lower quality and faster transmission) or 2 for 64 levels
(this gives higher quality and slower transmission).
Initial setting: 2
FUNCTION
4
16
or
1
4
or
Display
will show: FINE PRIORITY
NO
2
GRAY SCALE LEVEL
until
Press
display
shows:
64
2
NUMBER OF RINGS
First press FUNCTION
and 4 , then press # or
*
to scroll through the
options.
GRAY SCALE LEVEL
STOP
STOP
87
Advertisement
Table of Contents
