Setting Up The Projector Network Environment - Sharp XV-Z30000 Setup Manual

Setting up the Projector Network Environment

This section describes the basic procedure for using the projector via the network.
If the network is already constructed, the projector's network settings may need to be
changed. Please consult your network administrator for assistance with these settings.
You can make network settings both on the projector and on the computer. The following
procedure is for making settings on the computer.
Network settings on the computer
1. Connecting the projector to a computer
Connect a LAN cable (Category 5, cross-over type) between the computer and projector.
2. Setting an IP address for the computer
Adjust the IP settings of the computer to enable one-to-one communications with the projector.
3. Setting the Projector Using Internet Explorer
Adjust the projector network settings to conform to your network.
®
• Microsoft , Windows
Microsoft Corporation in the United States and/or other countries.
• All other company or product names are trademarks or registered trademarks of their respective
companies.
-8
LAN cable
(commercially available)
® ®
, Windows XP, Windows Vista
Temporarily change
the computer's IP
address.
Use Internet Explorer
(version 6.0 or later)
to make various
projector settings.
® ®
and Windows 7 are registered trademarks of
Page 9
Pages 10, 11
Page 12