Sharp XV-Z30000 Setup Manual page 16

Troubleshooting
Take the following steps for checking the network settings for the computer.
1. Open a command prompt.
2. After launching the command prompt, enter the command "ipconfi g", and press the "Enter"
•
C:\>ipconfi g
•
3. To return to the Windows
-16
Click "start" ➔ "All Programs" ➔ "Accessories" ➔ "Command Prompt" in order.
key.
Note
Communication may not be established even after carrying out the network settings
for the computer. In such cases, restart your computer.
Note
Usage examples of ipconfi g
C:\>ipconfi g /? displays how to use "ipconfi g.exe".
C:\>ipconfi g displays the set IP address, subnet mask and default gateway.
C:\>ipconfi g /all displays all the setting information related to TCP/IP.
® screen, enter "exit" and press the "Enter" key.