Supplies And User Maintenance; Toner Cartridge Replacement - Sharp AR-156 Operation Manual

SUPPLIES AND USER MAINTENANCE

This chapter describes how to replace the toner cartridge.
Be sure to use only genuine SHARP parts and supplies.

TONER CARTRIDGE REPLACEMENT

When the toner cartridge replacement required ( ) indicator lights up, replacement of the
toner cartridge will be needed soon. Obtain a new cartridge. When the toner cartridge replacement
required ( ) indicator blinks, the toner cartridge must be replaced before copying can be
resumed. Replace the toner cartridge by following the procedure below.
During a long copy run of a dark original, the ready (
the
copier will feed toner up to 2 minutes and then the ready (
light up. Press the print (
Ensure that the bypass tray is open and then open the side cover while pressing the
side cover open button.
Then, push gently on both sides of the front cover and open it.
Push the toner cartridge lock release lever and pull the toner cartridge out. Dispose of
the old toner cartridge in accordance with local regulations.
After removing the toner cartridge, do not shake it or tap on it. Doing so may
cause toner to leak from the cartridge. Put the old cartridge immediately in
the bag contained in the box of the new cartridge.
00C-4-156ex.p65
indicator light up, and the copier stop, even though toner is left. The
) key to restart copying.
Toner cartridge lock release
lever
23
) indicator may blink,
) indicator will
13/11/00, 13:43
4
23