Uninstalling The Emoty - Siemens CX70 Emoty User Handbook Manual

8 Getting started
Fitting the upper shell
1
Insert the stud on the bottom of the
upper shell into the corresponding
recess of the Emoty lower shell.
2
Carefully press on the upper shell until
it clicks into place.
Note
Please check that all sides of the upper
shell have clicked correctly into place.

Uninstalling the Emoty

Remove the upper shell of the
Emoty cover
1
Press on the side studs (p. 3) until the
upper shell springs open.
2
Pull the upper shell forwards at an
angle and remove it.
Removing the telephone
Tilt the lower shell forwards and take
out the telephone. You can carefully
tap the lower shell against your hand
so that the telephone comes out
gently.